QMI Aseptic Sampling System
(7-Port Septa)

QMI fittings are available for line installations (QMI Elbows) as well as on tanks and other vessels (QMI Tank Fittings and Tri-Clamp End Caps).

Application: Sampling a low-viscous product such as water, milk or juice


 

QMI 7-Port Aseptic Septum - Black
QMI 7-Port Aseptic Septum
Part Number: 110011

This port should be used for high temperature applications (Up To 250ºF)
Can only be used with 7 Port stainless fittings

QMI 7-Port Septum - Silicone High Temperature
QMI 7-Port High Temperature Silicone Septum
Part Number: 110021

This port should be used for high temperature applications (Up To 300ºF)
Can only be used with 7 Port stainless fittings

QMI Probe Septum
QMI Probe Septum
Part Number: 110031

The QMI Probe Septum allows processors to aseptically place temperature probes, pH probes, oxygen sensing probes and other similar products that measure various perimeters for processing.

The QMI Probe Septum also will facilitate the use of time/temp. recorders that are presently being introduced to the dairy, pharmaceutical and food processing industries.

QMI Probe Septum

The Probe Septum is pre-sterilized and can be retrofitted easily onto any processing line, fermentation vessel or other closed stainless steel system.

It is designed with one large needle channel in the middle of the Septum. There are also 6 remaining needle channels around the outside of the Septum which will accommodate sampling with an 18 gauge needle.